<div dir="ltr"><div dir="ltr"><div>Hi,</div><div><br></div><div>I just started using GSAS II to fit some X-ray diffraction patterns from a Regaku XRD. The first thing I am doing is to fit the profile parameter from a spectra of a LaB6 standard. The instrument is quite good so Ka2 peaks are clearly resolved for most peaks. I was wondering if I should pick all the Ka2 peaks in peak fitting or GSAS will identify those peaks automatically? </div><div><br></div><div>I have also got several incorrect fitted peaks (red/negative intensities in the Peak List) no matter I pick those Ka2 peaks or not. Is there a way to clean it up?  The range I am fitting is 20-145 degrees (2-theta). </div><div><br></div><div>I have been following this link for profile parameter fitting.</div><div><a href="https://subversion.xray.aps.anl.gov/pyGSAS/Tutorials/CWInstDemo/FindProfParamCW.htm">https://subversion.xray.aps.anl.gov/pyGSAS/Tutorials/CWInstDemo/FindProfParamCW.htm</a><span></span></div><div><br></div><div>Thank you. </div><div><br></div><div>Best,</div><div>Liao</div></div></div>